PORSCHE CAYENNE TURBO LENS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Endless ewig n35s racing front brake pads Porsche 996 turbo 3.6l 01-05
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal an...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
B&b exhaust system Porsche 996 Carrera 99-03
With an increased flow capacity, the billy boat performance exhaust system introduces increased mid-range and top-end performance and lends a crisper, more commanding exhaust note without being intrusive. All emission devices are retained and the system is obd-ii compatible. There is no modification necessary for installation as the headers and mufflers are a direct replacement for the factory exhaust equipment.
Available with twin oval tips (fpor-2000), twin elliptical tips (fpor-2005), or quad tips twin turbo style (fpor-2010). Please select tip style below.
This product is made to order, please allow 7-10 days prior to shipment.
*cont...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,925.18
Make a selection
Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
The 2020 Porsche 911 Carrera is the next generation of Porsche flat-six twin turbocharged engines that have been further developed and are more powerful than ever before. ...(choose a part on the right to read more)
$3,695.95
Make a selection
FVD spec. Billet 993gt2/993 turbo cylinder heads:
• interchangeable fit with GT2 & turbo standard cylinder head
• fully cnc machined from solid billet for maximum geometrical accuracy
• made from aerospace grade 2618 aluminum alloy, as commonly used for f1 & GT race pistons which has the highest possible material strength at elevated temperatures
• machined for 49.0 x 9.0 intake and 41.5 x 9.0 exhaust valves
• optimized combustion chamber reduces squish crevice volume - the effect of which increases chamber turbulence and results in higher flame speed, which improve's power, torque and efficiency.
• 15mm outside diameter sintered steel valve guides for reduced wear & improved valve support ...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,938.20
Make a selection
When you are installing a lightweight bumper or bumper bar for racing use, you want to remove as much weight as possible. Don't forget to remove your heavy factory supports. These are a lightweight alternative and are made in Germany. Weighs: .3 kilograms (.33 lbs) sold individually. 2 needed for the front bumper. Measurements shown are in centimeters.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $141.90
Make a selection
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: GT2 (96-98), turbo (95-98), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
This aftermarket brake system kit includes sport 4 piston brake calipers, brake pads, anti squeal shims, warning contacts, 2-piece formula z drilled brake discs (322 x 32 mm), brake dust shield and all necessary installation hardware. Zimmermann formula z disc details: - excellent deceleration and no distortion of friction ring at high temperatures - light weight (about 1 kg less) which lowers the unsprung mass - free floating construction allows radial expansion - increased resistance to heat cracks - optimized design of ventilation channels prevents hot spots - coat z coated discs please note: this kit requires a minimum of 17inch wheels!
This item may need to be sourced from Germany and would take 2-4 wee...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,786.18
Make a selection
The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection
By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. The reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD341999r. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform you immediately.
This item may need to be sourced from Germany and would take 2-4 weeks ...(choose a part on the right to read more)
General Fitment 911 1989-94
From $418.00
Make a selection
Kit includes:
Software fast load power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 295km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,331.70
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horse...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Kit includes:
Software fast load, power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 257kw (350hp) @ 7000rpm
Max. Torque - 410nm (302lbf ft) @ 4500rpm
Max. Speed - 298km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining t...(choose a part on the right to read more)
General Fitment 911 1998-05
$11,048.98
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler with 100cell sport catalytic, k24-race turbocharger l/r
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,844.70
Make a selection
For those wanting to make 800-1000 horsepower, we have this turbo kit that uses garrett GT series turbos and tial 44mm external wastegates. We have included the basic price for the upgrade here. Below is a selection of modifications you can choose from to build your vehicle with some or all of the performance parts you need to complete your 996 turbo.
The upgrade kit for the Porsche 996 turbo is a combination of proper fueling, air flow, and ecu tuning. The GT3076rs turbochargers or the GT2860rs turbos can be used with this kit. To reach these power levels, it does require a custom fuel system, larger throttle body and t plenum, custom y pipe, intake to turbo inlet system, and more. All of the parts ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,725.00
Make a selection
More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,403.00
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 507kw (690hp) @ 6500rpm
Max. Torque - 870nm (642lbf ft) @ 4500rpm
Max. Speed - 350km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$19,415.07
Make a selection
Kit includes:
Software fastload, sport air filter, FVD race exhaust system,
Headers with 200 cell catalytic.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 320kw (435hp) @ 7500rpm
Max. Torque - 430nm (317lbf ft) @ 5500rpm
Max. Speed - 320km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.0s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while r...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,844.40
Make a selection
Genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,0:1 max. Power - 390kw (530hp) @ 6500rpm max. Torque - 680nm (502lbf ft) @ 2200-4500rpm max. Speed - 329km/h max. Rpm - 6800rpm acceleration 0-100km/h - 3.7s tuning: max. Power - 449kw (610hp) @ 6500rpm max. Torque - 780nm (575lbf ft) @ 4500rpm max. Speed - 340km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.4s FVD dme / ecu programming philosophy: for more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly r...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $7,602.10
Make a selection
Club sports bar with harness bar and powder color coating
Example: pure orange (jägermeister orange)
(in all ral colors available)
Optional accessories:
- hei 600 004 bar padding header
- hei 600 006 pad material 38mm ø - length 1.9 meters
- hei 600 028 fia padding 38-42mm pipe, 915mm length
- fia 8857-2001 type a
Fits: GT3 rs, 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$1,995.60
Make a selection
An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, clutch masters is able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag.
General Fitment 911 2005-08
$1,208.93
Make a selection
An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, clutch masters is able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag.
Fits: 3.6l non-turbo only
Typical benefits of a lightweight flywheel for various engine types:
Reduced mass equals increased acceleration.
Increased supercharger efficiency due to less parasitic drag on the crank.
Improved mid-range torque in a normally aspirated engine due to not having ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,208.93
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|